|Type of Product:||Vian Power Electronic Control pack|
|Specifications:||From 1 Pump no air, up to 3 Pumps + Circulation Pump + Air|
|Compatible With:||Any retrofit system, suitable for upgrades.|
|Connections:||2-inch socket heater union sleeves. Amp cables plug into the PCB to operate the components.|
Length: 500 mm (inc heater) 320 mm (box casing only)
Width: 120 mm
Height: 300 mm
Topside: 178 mm x 86 mm
|Topside Buttons:||Overlays included to use depending on your outputs: 1 Pump no air, 1 Pump with air, 2 Pumps with air, 3 pumps with air.|
|Items Included:||x6 AMP connector 4 pins, x1 AMP connector 2 pins, x1 Bezel, x1 Topside, x1 System Vian Power 3Kw 825 CZm8|
This system has been designed to be able to run from 1 pump single speed upto 3 pumps + circ pump + blower.
Quick method to set the software
- With the system live, put dip switch one up (into test mode)
- Look on the box for the setup table, one of the setup numbers will match the equipment in the spa
- On the topside press warm, light, warm, warm, warm. Repeatedly press warm, it will go through s-01, s-02, s-03 etc.
- Once you reach the desired s number or setup, press light again, the system will restart
- Put dip switch one back down
For more detailed instructions see the Tech Sheet in the Downloads section.