|Type of Product:||Whirlpool Bath, Jetted Tub, Spa Bath Pump|
|Common Power Reference:||1.6 HP (output). The motor is rated at 1.4kW but the total output is rated at 1.2kW (1.61HP)|
|Power:||Volts: 230 Hz: 50Motor HP Low / High: 1.61Wet End Impellor HP: Amps Low / High Speed: 6.2RPM Low / High: 2800Capacitor:|
|Plumbing Connections:||1.5 inch|
|Electrical Connections:||Comes with plain cable attached|
|Dimensions:||Length: 335 mm Height: 210 mmDepth: 175 mm|
|Commonly Used With :||Larger whirlpool bath settings and also some smaller Hot Tubs or Spas.|
This pump is a lot stronger than your average whirlpool bath pump, so if you are planning to fit this as an alternative or a bespoke project you may wish to check performance graphs first.
The Perseus range has been designed to offer near silent running during operation.
The pump you will receive is the lower of the two in the picture.