|Type of Product:||Water pump / Jet pump|
|Common Power Reference:||1.5 HP 2 speed|
|Power:||Volts: 230 Hz: 50Motor HP Low / High: 0.43 / 1.86Wet End Impellor HP: 1.5Amps Low / High Speed: 1.5 / 5.7RPM Low / High: 1400 / 2800Capacitor Low / High: 16 uf / 25 uf|
|Plumbing Connections:||Comes with 2 x 63mm unions, 2 x 2 inches unions and 2 x 50mm unions.|
|Electrical Connections:||Comes with plain 3 core cable attached, you can easily replace this with your existing wire on site.|
|Dimensions:||Length: 390 mm Height: 230 mmDepth: 190 mm|
|Commonly Used With :||This pump replaces the 1HP 2 speed Sta-Rite pump found on Master Spas. This pump replaces such pumps found on most commonly Spaform Spas.|
1 set of unions included.
This pump is also the direct replacement for the discontinued GC150 with the blue wet end. It is not a straight swap for the GC150 as there are a few plumbing changes needed.
This pump will perform at its best with 2-inch plumbing. This pump does not always perform at its best when plumbed into 1.5-inch plumbing combined with running through a water diverter valve.