2 inch 100gpm Suction Assembly Grey

Salgspris364,00 kr


Type of Product: Suction
Manufacturer: Waterway
Specifications: 2" S - Grey
Most Common Size Reference: 2 inch - you can also fit 1.5 inch pipe right inside further up.
Dimensions: Outer Diameter of face: 97 mmOuter Height stood on face: Overall Length: Internal Diameter:
Fits Hole Size: 60 mm
Commonly Used With: 2 inch rigid pipe and 2 inch flexible rigid pipe. Spaform, Tango, Oslo, Platinum, Mardi Gras, Milano, Utopia, Dafodil, Midland, Geneva, Odyssey, Fraser, Aegean LPS, Touch Spas, Hot Tubs Direct and more.
Additional Notes:

Optimum flow rate: 100 gallons per minute. When using a specific suction you should take into account the required flow intake for the pump you will be plumbing to and also the heater. On ALL systems it is required by BISHTA standards to install 2 suctions per pump to avoid entrapment and or disembowelment.

Best to use a plumbing cleaner then pipe cement to assemble. Pipework pushes inside this part at the female end.

Assemble through the spa shell with silicone, you can use a gasket instead of the silicone but not both together as this often causes the gasket to spurge out the side and would cause a leak.

You may also like

Recently viewed