|Type of Product:||Drain but can be used as a suction|
|Specifications:||1.5" socket - grey|
|Most Common Size Reference:||1.5 inch|
|Dimensions:||Outer Diameter of face: Outer Height stood on face: Overall Length: Internal Diameter:|
|Fits Hole Size:|
|Commonly Used With:||1.5 inch rigid pipe and 1.5 inch flexible rigid pipe.|
Optimum flow rate: flow rate:100 gallons per minute. When using a specific suction you should take into account the required flow intake for the pump you will be plumbing to and also the heater. On ALL systems it is required by BISHTA standards to install 2 suctions per pump to avoid entrapment and or disembowelment.
Instead of a straight socket style connection this is a 1.5 inch 90 elbow fitting. This style of fitting has been seen in Chinese Spas but can be used as a space saver on any Hot Tub.
Best to use a plumbing cleaner then pipe cement to assemble. Pipework pushes inside this part at the female end.
Assemble through the spa shell with silicone, you can use a gasket instead of the silicone but not both together as this often causes the gasket to spurge out the side and would cause a leak.