3.6kW Curved Tee Heater

Salgspris6.026,00 kr


Type of Product: Heater assembly

Curved tee style, has also been made by Aquatemps in the past as well as Thermocore. RMF Related Heater 3.6kw. Part: A2360-5251ET, Serial: 33038-0904-8463.

This unit replaces the old Aquatemp heater on Arctic Spas from 2002-2005

Power: Volts: 230 Hz: 50 KW: 3.6 Amps: 13.5-14.5HP:
Specifications: Sensor compatibility: Works with Gecko sensors supplied with an Arctic Spa but can be modifiedMaterial spec:Required flow rate: Set by pressure switchFlow detection: 2-PSI Tecmark pressure switch
Compatible With: This is not an official Arctic Spa heater but will replace the heaters in Models: Cub, Fox, Glacier, Yukon, Frontier, Summit, Klondiker, Kodiac, Tundra 2002 - 2005. This unit will also work with newer models 2005 - 2007 as the pipework is flexible and can be easily re-positioned.
Connections & Fixings: This is a remote heater that connects to the control system directly to the PCB using 3 wires black green and white, the old version used to have a 5 pin grey plug. You will need to re-connect the pressure switch and also slide the hi-limit sensor back into the little pocket provided. The union connections are industry standard 2 inch female MPT screw thread connection.
Dimensions: Length: 215 mm Without plasic coupler. 360 mm With plastic coupler Diameter: 54 mm Between terminals: N/A Overall length complete: 410 mm
Additional Notes: If your heater looks the same as this one and it's on an Arctic then this is the one you need. Contact us if you need further help.

You may also like

Recently viewed